K1 #3206

[Scotty Long]

On page 43 of K1 manual Q6 it calls out for a C5739...mine is a C2166 is this ok ??? Or do I need a C5739 the errata is a bit confusing to a simpleton...

72/73/Scotty/NUØS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Scotty,

Install the 2SC2166 at Q6.

I am not certain which manual revision you are using, but at the top
left of the K1 manual Rev I, you should see the following:

"TO-220 package transistors Q6 and Q7 look identical, but are
different types. Locate the 2SC1969 (labeled "C1969"), Q7, and set it
aside. The remaining transistor, Q6, will be either a 2SC2166 (C2166)
or a 2SC5739 (C5739). This transistor will be installed first"

73,
Don W3FPR

On 5/25/2013 3:19 PM, Scotty Long wrote:
> On page 43 of K1 manual Q6 it calls out for a C5739...mine is a C2166 is this ok ??? Or do I need a C5739 the errata is a bit confusing to a simpleton...
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html