Hi
I have a K1 which works very well, I have it set for the 80KHz range on the
VFO, I find that the drift is within spec, the first 5-10 mins is the worst
at about 80-100hz after that it slows down but in a hour from cold is around
200hz, when warm it is very stable and no issue, I have just changed it to
wide vfo (150KHz) and it seems loads better, only about 20hz from a cold
start over 10mins and not much shift after that. Any one else found this
too? Any ideas why?
I note that the cap used for the narrow range is a ceramic disk and the wide
is a poly type?
Cheers
Paul
M0BMN
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.11/191 - Release Date: 02/12/2005
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
