K1 Issues with RIT and ATTN LED's not functioning

[Paul Kirley-2]

W1SFR sed:
I recently purchased a K1 and found that the LED's for the RIT and ATTN
don't function correctly. When I turn on the rig the LED's cycle
correctly then go out. When I push either of the buttons and turn the
RIT or ATTN on, neither of the lights come on.

Since you recently bought the K1, you may not be aware that there is a
menu setting for this.  Check the LED setting and verify that it is ON.  
It's on page 52 of my 2001 owner's manual.

73, Paul W8TM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]