K1 : L1 to L8 valuesss

[fr5dh]

Hello,


I have a K1 with 2 band (30m and 20m) and I would like to know the value (or reference) of L1 -L8 value on the filter board.


L1 L2: 10MHz premix band-pass filters

L3 L4: 14MHz premix band-pass filters

L5 L6: 10MHz RF band-pass filters

L7 L8: 14MHz RF band-pass filters


I can't found the info in the owner's manual.


Thanks for your help,


Pascal Deveaux

Reunion Island
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Pascal,

The parts information is in the parts list for the KFL1-2 kit.
Those variable inductors are 1uHy maximum.

73,
Don W3FPR

On 1/8/2018 12:43 PM, Pascal Deveaux wrote:
> Hello,
>
>
> I have a K1 with 2 band (30m and 20m) and I would like to know the value (or reference) of L1 -L8 value on the filter board.
>
>
> L1 L2: 10MHz premix band-pass filters
...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]