K1 + Timewave DSP 59+

I'd like to connect the output of my K1 to a Timewave DSP-59+ but have
had some difficulty.
Tried connecting a 2-pin header plug to the speaker connection on the
PC board and hence to the input of the DSP-59+ but regardless of how
far I turn up the AF gain on the K1, the DSP fails to indicate enough
"drive" and the audio sounds distorted as if it was amplified signal
leakage.  There is enough signal for the audio AGC on the DSP to work,
however.

Advice, counsel, words of wisdom welcome.

Also, thanks to Jim K4ZM for finishing and troubleshooting my K1 after I lost some fine motor skills. (motor skills returning, my CW no longer sounds like I'm sending with a loose toggle switch manipulated by my left big toe....HI!)

72,

Tim

____________________________________________________________
Learning Centers - Click Here.
http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsIpv1W0uiGtjMYMFkXOwzJZQYA3jdo1JzwBnEqDrqNkzL0FeeeECE/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html