K1 led backlight setting

[WD6DBM]

Is there a recommendation from you all as to which led brightness setting to use for K1 led backlight?  It will be used primarily for hotel and field portable ops,  thanks

Eric WD6DBM

Sent from my iPhone
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Eric,

If you are going to be using it in lighted areas and can stand the
increased current drain, go for the brighter option.  OTOH, the K1
display without the backlight is fine in lighted areas already, and the
dim backlight is good for dark places, so just take your pick based on
your particular desires.

73,
Don W3FPR

Eric wrote:
> Is there a recommendation from you all as to which led brightness setting to use for K1 led backlight?  It will be used primarily for hotel and field portable ops,  thanks
>
> Eric WD6DBM
>  
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html