K1 minor stumbling block...

[Anthony Hardwick]

> This is THE most common and well-known "problem" that comes up for K1
> builders.
>
> The problem is due to the fact that you have not applied the ERRATA  
> F-8
> that comes with K1 manual, rev. F of 01-24-2002:
>
> http://www.elecraft.com/manual/K1_Errata_Rev_F-8.pdf
>
> You MUST install a jumper at the location of RFC8 before voltage  
> will be
> available as shown in the voltage checks on page 30.   Unfortunately,
> the manual DOES NOT tell you to install the jumper until PAGE 31!!!  
> So
> obviously the checks on page 30 will fail.

Yes, I realized this shortly after I posted that.  I did post a follow  
up mentioning that I was an idiot and had figured out that I had  
ignored the errata note that I made on the top of the page!  Amazing  
how I just didn't even see it when first following the instructions.  
I guess I was so tuned into the printed manual's instructions that I  
ignored my handwritten amendment.

I agree that a revised manual would be nice, and is warranted.  The  
kit is so well designed and a pleasure to build that it seems a shame  
to not have such errors from long ago not incorporated into a new  
revision of the manual.  In any case the work to do the revision won't  
bring any additional revenue, but it would give a final polish to the  
kit overall.

I'm in the final alignment and testing phase, and hope to have the  
radio 100% in a couple of days.  The 4th will be busy enough without  
working on the radio... which reminds me...

Happy 4th of July to all the US members of this reflector, and any ex-
pats too!

Best,
Anthony, W6GC
_________________
Anthony Hardwick
[hidden email]



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike Harris-9]

G'day,

I no longer do all that manual updating from the errata.  All I do is make
a bold note to "see errata #2" or whatever at the appropriate point in the
manual.  Saves all that writing and cutting and pasting of pictures etc.

Enjoy the 4th.  My daughter is tall ships racing up the coast from
Charleston to Boston in a square rigger, the barque Europa.  Currently
abeam Long Island.

Regards,

Mike VP8NO

----- Original Message -----
From: "Anthony Hardwick" <[hidden email]>
To: <[hidden email]>
Sent: Saturday, July 04, 2009 12:51 AM
Subject: [Elecraft] K1 minor stumbling block...


|> This is THE most common and well-known "problem" that comes up for K1
| > builders.
| >
| > The problem is due to the fact that you have not applied the ERRATA
| > F-8
| > that comes with K1 manual, rev. F of 01-24-2002:
| >
| > http://www.elecraft.com/manual/K1_Errata_Rev_F-8.pdf
| >
| > You MUST install a jumper at the location of RFC8 before voltage
| > will be
| > available as shown in the voltage checks on page 30.   Unfortunately,
| > the manual DOES NOT tell you to install the jumper until PAGE 31!!!
| > So
| > obviously the checks on page 30 will fail.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html