K1 noise blanker assembly question

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K1 noise blanker assembly question

Peter Spotts
Hi folks,

This may be an trivia question for Super Don. ;-) In the sequence of
Revs to the KBN1 board, does Rev C include Rev Cr, or is Cr its own
board revision? My board is Rev Cr, and toward the end of assembly
there are a couple of capacitors that for Rev C require special
installation. I don't want to misread either the instructions or the
Rev number and muck things up.  

Oh yes, Happy New Year to all Elecrafters, whether on this list server
or not!

With best regards,

Pete
--

Peter N. Spotts -- NM5PS
ARRL Public Information Coordinator, New Mexico Section
http://www.nm5ps.net
Email: [hidden email] | Skype: pspotts
AMSAT #40612 | CalQRP #67 | G-QRP #13202 | NAQCC #2446 | NEQRP #714
Polar Bear #348 | QCWA #34679 | QRP-ARCI #4174 | SKCC #4853S

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K1 noise blanker assembly question

Don Wilhelm
Pete,

Rev Cr should be the same as Rev C.  If you have the two extra
capacitors, install them as indicated in the instructions.  The Rev D
board had thru-holes for those capacitors, but I don't think the Rev D
board was ever released.  I have never seen one.

73,
Don W3FPR

On 1/3/2019 10:23 PM, Pete Spotts wrote:

> Hi folks,
>
> This may be an trivia question for Super Don. ;-) In the sequence of
> Revs to the KBN1 board, does Rev C include Rev Cr, or is Cr its own
> board revision? My board is Rev Cr, and toward the end of assembly
> there are a couple of capacitors that for Rev C require special
> installation. I don't want to misread either the instructions or the
> Rev number and muck things up.
>
> Oh yes, Happy New Year to all Elecrafters, whether on this list server
> or not!
>
> With best regards,
>
> Pete
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]