"Other than they both fit into the same space and
for that reason cannot be both present at the same
time": Always these troublesome minor details, Don
:-)
I suspect that if a 6-band K1 (say, with external
ATU like the T1) had been doable, Wayne would have
done it!
73, Phil W7OX
On 1/12/15 10:29 AM, Don Wilhelm wrote:
> Dale,
>
> Other than they both fit into the same space and
> for that reason cannot be both present at the
> same time - there is no problem.
> The offsets are remembered for all 6 bands.
> So if you replace the 4 band board with the 2
> band board, all you need to do is set the menu
> b1 parameter to 3.5 and the b2 parameter to 21.0
> and you will be ready to operate.
>
> 73,
> Don W3FPR
>
> On 1/12/2015 1:06 PM, Dale Putnam wrote:
>> Is there any reason why, a 2 band module for
>> the K1, couldn't be made for 80/15?
>> And installed with a 4 band (40-30-20-17)?
>> Thank you!
>>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
