Robin,
I tried to reply to your earlier question, but since you posted to
nabble only instead of the Elecraft reflector, I was not able to
respond. I do not subscribe to nabble and my response was rejected.
Post to the Elecraft reflector to avoid that problem.
Such crackling static is usually from a local noise source rather than a
problem in the K1 (or any other transceiver). Yes, it will be muted
during transmit, and if the noise is strong enough it will de-sense the
receiver.
If the noise is heard when you are connected to a dummy load, then the
problem is in the K1, but if it only occurs with an antenna connected,
then it is a local noise source that is coming from your antenna.
73,
Don W3FPR
On 7/4/2013 11:34 PM, k1-4 user wrote:
> Hello group
>
> I
> My K1-4 with 17m worked great on FD with > 95% call to contact.
> The only annoying thing is a crackling static that starts slowly but
> crescendos quickly, is strong in strength, and is quieted by transmitting or
> by pushing the menu button or selection of the next NB level including off.
> Is distinguished easily from atmospheric qrn.
> In normal active operation the t-r mutes the noise and more than slightly
> desensitizes the receiver and cuts the static back until it cycles up again.
>
> Any thoughts are appreciated
>
> Robin
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
