K144XV Manual (corrected)

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K144XV Manual (corrected)

John Ragle
I presume that the statement in the K144XV manual on P. 19, Step 2
should read*Int Trn 0* not*Int Trn 1*?

John Ragle -- W1ZI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K144XV Manual (corrected)

Don Wilhelm-4
  John,

It seems that any of the "Int Trn x" can be used - the difference is in
the band decoder output.  See page 19 of the K3 manual.

73,
Don W3FPR

On 12/11/2010 7:29 AM, John Ragle wrote:
> I presume that the statement in the K144XV manual on P. 19, Step 2
> should read*Int Trn 0* not*Int Trn 1*?
>
> John Ragle -- W1ZI
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K144XV Manual (corrected)

AC7AC
CONTENTS DELETED
The author has deleted this message.