K144XV center freq. config

[Lane-2]

Hi,

I just installed the K144XV w/ an FM filter. Configured the K3 for a
local repeater and tuned in. The repeater frequency is 146.920, and I
hear people fine, but I tune to 146.922.60 in order to center the
signals by looking at the P3 and thats where I hear contacts much
clearer.

So I'm not sure what I did wrong. But here's what I did.

FM filter in slot 1.
Crystal filter setup from the manual:
        BW 13.0
        Set Offsets for 144, 146
FM Mode: On
Set repeater offsets
Set CTCSS tone
Sql set to sub-pot
Set to All-mode squelch

Any ideas?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Lane-2]

Shameless bump. Anyone have ideas?


---------- Forwarded message ----------
From: SRD <[hidden email]>
Date: Thu, Sep 27, 2012 at 10:09 PM
Subject: K144XV center freq. config
To: [hidden email]


Hi,

I just installed the K144XV w/ an FM filter. Configured the K3 for a
local repeater and tuned in. The repeater frequency is 146.920, and I
hear people fine, but I tune to 146.922.60 in order to center the
signals by looking at the P3 and thats where I hear contacts much
clearer.

So I'm not sure what I did wrong. But here's what I did.

FM filter in slot 1.
Crystal filter setup from the manual:
        BW 13.0
        Set Offsets for 144, 146
FM Mode: On
Set repeater offsets
Set CTCSS tone
Sql set to sub-pot
Set to All-mode squelch

Any ideas?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html