The K144RFLK is strongly recommended. There were frequency stability
issues with the 116 and 118 MHz crystals (though believe this was
improved sometime in the last year or so) used for the injection
frequency at the tranverter. The K144RFLK removes that problem,
because the root frequency reference will be the TCXO in the K3 (or
the K3EXREF source if you have a 10 MHz lab reference avaiable).
73,
matt W6NIA
On Sat, 08 Sep 2012 16:42:54 -0500, you wrote:
>To:
[hidden email]
>Subject: [Elecraft] K144XV ordering
>From: SRD <
[hidden email]>
>Date: Sat, 08 Sep 2012 16:42:54 -0500
>
>Hi,
>
>I'd like to make sure I've got this complete (always did hate the
>order page). I have a K3/100 and wanting to add 2M's. Please correct
>me if I'm wrong, but what follows is my understanding of whats
>required.
>
>- K144XV-K Internal 2M 10w Module Kit
>- Check the K3/100 below it
>- KXV3A RX Ant., IF Out and Xverter Interface
>- A KXUSB interface cable will also be shipped w/ this.
>
>I didn't leave anything out thats required? And the K144RFLK, just
>"how" recommended is this?
>
>Much appreciated.
>______________________________________________________________
>Elecraft mailing list
>Home:
http://mailman.qth.net/mailman/listinfo/elecraft>Help:
http://mailman.qth.net/mmfaq.htm>Post: mailto:
[hidden email]
>
>This list hosted by:
http://www.qsl.net>Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
