Brian,
You have the Rev A manual, and yes, it does say that, but it is incorrect!!
That manual was written before the KSB2 was fully developed, and once the
KSB2 was completed, the menus were made to fit the real KSB2 rather that the
initial design concepts.
Solution - download the K2 Rev F manual and look at that, and while you are
at the Elecraft manuals page, download the manual for each of the options
you have installed in your K2.
You may want to upgrade that K2 - with the A to B change and all it's
'optional' parts plus the PLL Temperature Stability change and the Keying
Waveshape change, you will end up with the electrical equivalent of a brand
new K2.
73,
Don W3FPR
> -----Original Message-----
>
> Just picked up a K2 no 00374 to join my K1, I have a question about the
> menu.
> In the ops manual it says that Mic Gain SSBA is from 0 to 255 and the
> Processor level SSBP is also 0 to 255
>
> My menu shows SSBA with settings of 1, 2, 3 or bAL
> and the SSBP with settings of 1-1 to 4-1
> Is this to do with a different version of firmware?
> My firmware is 1.04c and 1.02
> Any information would be much appreciated.
>
> Regards..Brian GM4XQJ
> QRP ARCI # 7644, GQRP C # 2743, QRP C # 097
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.9.0/50 - Release Date: 7/16/2005
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
