I put my KPA100 and KAT100 in a separate EC2 enclosure. This allows the
K2/10 to be unhooked and taken portable. It also provides the key out
jack for driving a larger amp in the shack.
Mike
KI0HA
On 7/31/2014 6:22 PM, Dean wrote:
> My K2-10 is my backup rig. It has an internal homemade transistor amp keyer that keys the AL811H when 100 watts is needed.
>
> I would like to add the KXPA100 to have the option to fully drive the AL811H when needed, or to run 100 watts without tuning the larger amp.
>
> What would be the best way to key both amps at the same time? Any other considerations that I should know for setting up this configuration? For those that may ask, the reason I want to use the KXPA100 instead of the internal K2 amp is so the radio will still be available for qrp backpacking and such.
>
> Thanks for your help!
>
> Dean
> KG7MZ
>
>
> Sent from my Galaxy Note III
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
