K2/100 no DSP Menu

[James T. "Jim" Rogers, W4ATK-2]

        When I fired up the K2 today, it was all confused and I had to do a 4-5-6
reset. After the reset I could get no DSP menu so I removed the KDSP and
jumpered the audio lines in order to do the CAL FIL. At that time when I
pressed the AFIL switch I got a "not installed" message as I should. After
the CAL PLL, and CAL FIL operations, and putting everything back together I
tapped DISPLAY to get the KDSP menu and no luck. Just Frequency and Voltage
and Current. Activating the AFIL switch cycles me thru CF1 thru CF4 as
expected.
        Ideas anyone?

Jim W4ATK

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KK7P]

> When I fired up the K2 today, it was all confused and I had to do a 4-5-6
> reset. After the reset I could get no DSP menu ...

After the 4-5-6 reset, be sure you enable the "real time clock" in the
secondary menu or the K2 won;t be able to talk to the DSP.

73,

Lyle KK7P

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com