Dear Don,
I removed the cover on the on the right-hand side and then I unplugged only the connector at P6 AUX RF. All other connectors are still plugged in and for supply I used the power-pole connector.
Here are the measeurements at the BNC-conector at a supply of 12V (starter battery).
MHz RF Out (W)
3.500 10.5
7.000 11.5
10.100 11.0
14.000 12.0
18.068 12.1
21.000 11.1
24.890 10.1
28.000 9.0
I think, that the results are still O.K. My K3 shows the same behaviour at 28 Mhz!
So I have to check my KPA100. I will do this next weekend. So Don, thank you very much for your information.
Vy 73, Holger - DL9HDA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html