K2 12M/10M BPF Mod - K2 VFO ALC Mod

[dave.wilburn]

Just opened up the KPA100 and saw the sheet for the mods mentioned
above.  I do not see a statement about them being incorporated after a
certain serial number.  Have they been incorporated?
--

David Wilburn
[hidden email]
K4DGW
K2 #5982
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[dave.wilburn]

I looked through the installation manual for my K2, and found most of
the parts referenced, installed with the new values, so I assume that
both of these mods are incorporated in the new builds.

David Wilburn
[hidden email]
K4DGW
K2 #5982


David Wilburn wrote:
> Just opened up the KPA100 and saw the sheet for the mods mentioned
> above.  I do not see a statement about them being incorporated after a
> certain serial number.  Have they been incorporated?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Dave,

That is true - the K2s have included those changes for quite a while
now, but every KPA100 kit contains those parts in support of those who
still have older/non-updated K2s.

Still, it is good that you verified you have the correct values
installed in your K2.

73,
Don W3FPR

David Wilburn wrote:

> I looked through the installation manual for my K2, and found most of
> the parts referenced, installed with the new values, so I assume that
> both of these mods are incorporated in the new builds.
>
> David Wilburn
> [hidden email]
> K4DGW
> K2 #5982
>
>
> David Wilburn wrote:
>> Just opened up the KPA100 and saw the sheet for the mods mentioned
>> above.  I do not see a statement about them being incorporated after a
>> certain serial number.  Have they been incorporated?

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[dave.wilburn]

Sure thing.  I identified most, but not all.  I could not find D8
mentioned in the document.  Doesn't mean it isn't in there, just didn't
find it.  I will find my soft copy later and do a search and see if I
can sort out the rest.  If not, I will pop the covers and check.

I think I have the SSB all sorted out.  Haven't had a chance to talk
with anyone nearby today.  Right now working on the inventory for the
KPA100.  Thanks.

David Wilburn
[hidden email]
K4DGW
K2 #5982


Don Wilhelm wrote:

> Dave,
>
> That is true - the K2s have included those changes for quite a while
> now, but every KPA100 kit contains those parts in support of those who
> still have older/non-updated K2s.
>
> Still, it is good that you verified you have the correct values
> installed in your K2.
>
> 73,
> Don W3FPR
>
> David Wilburn wrote:
>> I looked through the installation manual for my K2, and found most of
>> the parts referenced, installed with the new values, so I assume that
>> both of these mods are incorporated in the new builds.
>>
>> David Wilburn
>> [hidden email]
>> K4DGW
>> K2 #5982
>>
>>
>> David Wilburn wrote:
>>> Just opened up the KPA100 and saw the sheet for the mods mentioned
>>> above.  I do not see a statement about them being incorporated after
>>> a certain serial number.  Have they been incorporated?
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jozef Hand-Boniakowski]

I completed my K1 on 2/26/07 and have worked 44 countries, 27 states and
285 QSOs.  I love the radio and it has performed well.  I have a
question about the battery voltage readout and was wondering if this is
typical or not.  When I put the display function into battery voltage
the LCD reads battery voltage like it is supposed to (i.e. 12.6) and the
display blinks every second or so.  What I also notice is the the
attenuator (ATTN) LED blinks fast ever so slightly at about 10 time per
second.  This blinking is extremely dim even in darkened conditions but
noticeable.  Is this normal.  It only happens in the battery voltage mode.

Jozef WB2MIC

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com