K2 #2431 for sale.

[k5oai]

For Sale K2 #2481
Software versions 2.01 H    1.02

Rig was purchased April 2007. I am it's 2nd owner.
Rig has always been operated inside my shack.
Rig was aligned and tested June 16, 2010 by Don Wilhelm, W3FPR.
It has seen very little use since then.

Reason for sale: K2 has sat mostly unused
since it was replaced as my main rig, by K3 #4123,
which has been begging me for a KRX3 and matching filters. ;-)

K2/10 HF Transceiver 699.95
KSB2      SSB Option 109.95
K160RX  160M Option 39.95
KNB2 Noise Blanker 49.95
KAF2 Audio Filter 79.95
KIO2 RS-232 Serial Interface (with cable)  99.95
FDIMP Finger Dimple for K1 & K2 6.95
ETS15 1.5" Tilt Stand for EC2, KAT100 14.95
also included is the original 3" Tilt Stand

K2KSB2XTLS Matched Filter Crystals (14) For existing K2 and KSB2 combinations. 15.00

E850089 Grill Cloth 1.00
BFOMDKT K2 BFO Toroid & PLL Ref Osc Xtal Upgrade 10.00
XFILMDKT Second Filter Upgrade 10.00

CliftonLabs Z10000-K2 Buffer installed for IF output. $44.95
I will include the working Softrock Lite II interface
used between the K2 and the computer for panadapter.

Blemishes are worn paint on tuning knobs center edges
and a mis-drilled hole on rear, covered by serial number :-(

Total invested ~$1200.00
Asking $750.00

Can be seen at:
https://picasaweb.google.com/k5oai.sam/K22481#

Contact me off list please.

--
GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[k5oai]

forgot also included is
K0SS K2 External T-R Relay Driver kit, installed. $16.00

GB & 73
K5OAI
Sam Morgan

On 5/21/2011 8:17 PM, Sam Morgan wrote:

> For Sale K2 #2481
> Software versions 2.01 H 1.02
>
> Rig was purchased April 2007. I am it's 2nd owner.
> Rig has always been operated inside my shack.
> Rig was aligned and tested June 16, 2010 by Don Wilhelm, W3FPR.
> It has seen very little use since then.
>
> Reason for sale: K2 has sat mostly unused
> since it was replaced as my main rig, by K3 #4123,
> which has been begging me for a KRX3 and matching filters. ;-)
>
> K2/10 HF Transceiver 699.95
> KSB2 SSB Option 109.95
> K160RX 160M Option 39.95
> KNB2 Noise Blanker 49.95
> KAF2 Audio Filter 79.95
> KIO2 RS-232 Serial Interface (with cable) 99.95
> FDIMP Finger Dimple for K1 & K2 6.95
> ETS15 1.5" Tilt Stand for EC2, KAT100 14.95
> also included is the original 3" Tilt Stand
>
> K2KSB2XTLS Matched Filter Crystals (14) For existing K2 and KSB2 combinations.
> 15.00
>
> E850089 Grill Cloth 1.00
> BFOMDKT K2 BFO Toroid & PLL Ref Osc Xtal Upgrade 10.00
> XFILMDKT Second Filter Upgrade 10.00
>
> CliftonLabs Z10000-K2 Buffer installed for IF output. $44.95
> I will include the working Softrock Lite II interface
> used between the K2 and the computer for panadapter.
>
> Blemishes are worn paint on tuning knobs center edges
> and a mis-drilled hole on rear, covered by serial number :-(
>
> Total invested ~$1200.00
> Asking $750.00
>
> Can be seen at:
> https://picasaweb.google.com/k5oai.sam/K22481#
>
> Contact me off list please.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html