JT,
No way! Wait until you have completed the K2 and use the method
described on the Elecraft website to accurately set the 4 MHz reference
using 10 MHz WWV or other accurately known frequency standard station -
follow that with a CAL PLL and CAL FIL to produce accurate dial
calibration on the K2. In the meantime, it is not critical, so just set
the trimmer cap to its mid-rotation position.
If you want more information about doing the Dial Calibration steps,
check my website
http://w3fpr.qrpradio.com.
73,
Don W3FPR
JT Croteau wrote:
> Anyone know if the frequency counter mode of the MFJ-259B is accurate
> enough to do the 4 MHz Oscillator Calibration of the K2?
>
> Thanks
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
