Al,
There are no 'right' answers, but being an 'old timer', I would suggest that
you start with a straight key long enough to acquire a feeling for proper
character formation and spacing. After that, I would suggest going to an
iambic keyer - skip the non-iambic initially (since you already have a
trained response for proper character formation and spacing from the
straight key exercise). Then if you have extreme difficulty with the iambic
keying, drop down to the non-iambic with a single lever paddle. (A single
lever paddle instantly turns an iambic keyer into a non-iambic keyer).
Just my personal opinion here based on the predominance of the iambic keyers
available today. I learned on a straight key, and migrated to a bug and
then an ACCU-KEYER, but because of my old bug habits, I have always had
problems with iambic keyers. If you learn the iambic technique before
acquiring other habits, you will be further ahead than the point at which I
am stuck (and likely will never extract myself).
73,
Don W3FPR
> -----Original Message-----
>
> I have completed K2 # 4670 - thanks for the help.
>
> I can now listen to W1AW code and work on getting on the air after I pass
> the Element 1 and General.
>
> But, what is the best key to start with - straight, iambic,
> non-iambic? or
> what. So many choices and I need advice.
>
> Thanks in advance.
>
> 73,
> Al
>
> KI4HRN
> Allan Bacon
>
[hidden email]
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
