Chris,
Since they both fit into the same space, only one can be present in the K2.
BUT - the K60XV has a low power KEYOUT signal available at pin 2 of J2.
As long as your amp keying requirements do not exceed the current and
voltage that a 2N7000 drain can handle, you may use that to key your amp.
For my K2, I added an RCA jack near the key jack and wired the keying
output to that jack.
73,
W3FPR
On 4/16/2013 3:30 AM, Chris Meagher wrote:
> I bought a 60m add-on kit for my K2, but on reading the instructions, I
> find it is incompatible with the N0SS amp keyer that I have fitted, in that
> they both use the same socket. Has anyone found a way to have both
> installed? Reply off the reflector OK, to
[hidden email]. From Chris
> VK2ACD K2-3666 K3-0685 P3
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
