Frank,
There is a protective series diode in the K2 - the internal K2 display
reads the voltage on the K2 side of that diode. Due to the diode drop,
the voltage on the power supply side of that diode will be greater.
73,
Don W3FPR
On 1/1/2012 5:03 PM, kf4clo wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html