I have an heavy trouble with my K2/100. During last
french contest in SO2R setup, I made a mistake and keyed the K3 with the K2
still on the same band. I heard a strong noise in the K2, saw smoke and the
TX was dead. RX OK. I've just replaced the 2 low level PA transistors :
they were broken, both electrically and physically.
Now the K2 has following behaviour : pressing TUNE,
the PA collectors current rise very shortly, then fall. After 1 or 2
seconds, depressing TUNE has the same behaviour. I measured the 8 T
line and the 8T voltage follows the same law. Suspecting any processor error, I
made a reset (456POWER). No change.
Any idea ? Where sould I focalise my efforts
?
73
Luc/F6HJO/HB9ABB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
