K2 AGC mod information needed

[Don Wilhelm-4]

  In some time past, someone developed a mod for the K2 AGC which
allowed all parameters for the threshold and S-meter response to be varied.
The mod used 3 trimpots installed on the Control Board.

I need the documentation for this mod if possible.  I thought I had most
all the K2 documentation or knew where to find it, but this one escaped.

Help.

73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

  The information is now in my hands, thanks to Gary KI4GGX.

73,
Don W3FPR

On 1/27/2011 9:59 AM, Don Wilhelm wrote:
>    In some time past, someone developed a mod for the K2 AGC which
> allowed all parameters for the threshold and S-meter response to be varied.
> The mod used 3 trimpots installed on the Control Board.
>
> I need the documentation for this mod if possible.  I thought I had most
> all the K2 documentation or knew where to find it, but this one escaped.
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html