Joe,
I have the same problem with my AGC and when I replaced the 5.068MHz X1
the problem remained. I wonder if both crystals are bad or if there is
some other cause? In my case, when I turn off the AGC, the s-meter gets
pegged at +40 and the audio is muted. Did you change any other
components or did just replacing X1 the first time fix the problem?
Also, what value of RP6 is installed on your control board? My RP6 is a
4.7K network.
Thanks.
Jeff (K2#5210)
<-----Original Message----->
>From: jo benoit
>Sent: 3/8/2006 8:27:20 AM
>To:
[hidden email]
>Subject: Re: [Elecraft] K2 AGC off problem
>
>hi elecrafters,
>I received a new 5.068 Mhz Xtal and replaced the X1 on
>the control board.
>The Audio is not muted any more when I turn the AGC
>off.
>Thank you Ken K3IU, Bill WU0R, and Gary, Scott and
>Brian at Elecraft service/parts.
>73 de ON5AO K2#5237
>joe
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam? Yahoo! Mail has the best spam protection around
>
http://mail.yahoo.com
>_______________________________________________
>Elecraft mailing list
>Post to:
[hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help:
http://mailman.qth.net/subscribers.htm>Elecraft web page:
http://www.elecraft.com>.
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
