Hi,
My K2 has been working well and I recently noticed that the AGC fast/slow has little or no effect. I suspect it's been this way for quite some time. I made some measurements and when performing the AGC tests on U2 (LM833), I get very close to the expected values for the specified conditions.
My next step was to look at the /SLOW AGC line and select fast or slow. When I do this, I get either 4millivolts or 18 millivolts...not what I had expected. I thought this signal was being driven by U6 so I would have expected either a logic 1 or 0.
Any comments will be appreciated.
Thanks in advance.
Mike, WA1SEO
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
