[K2] ALC and power control on 40m SSB in K2/100

[Steve Kavanagh]

John:

The values I used are in the 1st link I sent, if you dig down far enough.  

"I put a 1k resistor in series with the base of Q1 in
 the KSB2 and put 3.3k in parallel with R9.  It's
 pretty fiddly work on this compact board, but doable.
 This is in the middle of the range for R9 suggested by
 Gary Surrency. "

I've had no problems with this combination, but I imagine each K2 will be a bit different.

73,
Steve VE3SMA


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html