K2 Audio/Sensitivity Issue

[Bob Wehking]

About two months ago, I built a K2 - SN 4998 , KDSP, KSB2, KPA100 & everything worked.

Yesterday I built the KNB2 & K160RX boards & after installing them, my audio is very low except for strong SSB signals & the sensitivity across all band appears to have decreased. When using the XG2 signal Generator, neither the 50uv or 1uv cause the "S" meter to indicate anything.

Anyone have any suggestions?


Bob
WB8DDI
K2# 4998
 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bob Wehking]

I also took all the modules out of my K2 including the KPA100 & installed my
Rework Eliminators to see if one of the modules was causing the issue, but I
still have low audio & sensitivity. I did check the TX & the power across
all bands is OK. I also put a headset on the radio without any change.

----- Original Message -----
From: "Bob Wehking" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, October 09, 2005 11:03 AM
Subject: [Elecraft] K2 Audio/Sensitivity Issue


About two months ago, I built a K2 - SN 4998 , KDSP, KSB2, KPA100 &
everything worked.

Yesterday I built the KNB2 & K160RX boards & after installing them, my audio
is very low except for strong SSB signals & the sensitivity across all band
appears to have decreased. When using the XG2 signal Generator, neither the
50uv or 1uv cause the "S" meter to indicate anything.

Anyone have any suggestions?


Bob
WB8DDI
K2# 4998

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.13/126 - Release Date: 10/9/2005

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bob Wehking]

Things work better when you follow directions. I forgot to add the jumper
where R89 once was installed.


----- Original Message -----
From: "Bob Wehking" <[hidden email]>
To: "Bob Wehking" <[hidden email]>; <[hidden email]>
Sent: Sunday, October 09, 2005 11:09 AM
Subject: Re: [Elecraft] K2 Audio/Sensitivity Issue

>I also took all the modules out of my K2 including the KPA100 & installed
>my Rework Eliminators to see if one of the modules was causing the issue,
>but I still have low audio & sensitivity. I did check the TX & the power
>across all bands is OK. I also put a headset on the radio without any
>change.
>
> ----- Original Message -----
> From: "Bob Wehking" <[hidden email]>
> To: <[hidden email]>
> Sent: Sunday, October 09, 2005 11:03 AM
> Subject: [Elecraft] K2 Audio/Sensitivity Issue
>
>
> About two months ago, I built a K2 - SN 4998 , KDSP, KSB2, KPA100 &
> everything worked.
>
> Yesterday I built the KNB2 & K160RX boards & after installing them, my
> audio is very low except for strong SSB signals & the sensitivity across
> all band appears to have decreased. When using the XG2 signal Generator,
> neither the 50uv or 1uv cause the "S" meter to indicate anything.
>
> Anyone have any suggestions?
>
>
> Bob
> WB8DDI
> K2# 4998
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.13/126 - Release Date: 10/9/2005
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.13/126 - Release Date: 10/9/2005
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com