K2 BFO Test: BFO low freq is really low (SOLVED)

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

K2 BFO Test: BFO low freq is really low (SOLVED)

Jason Marten
Thank you, thank you!  Alignment and Testing, Part II has been completed.

I swapped out the blue Q9 and Q10 (MPS5179) according to Builder Alert 21,
and replaced them with two MPS2222A transistors that I had on hand (the
builder alert suggests these as possible alternatives).  After doing this,
all of the BFO values and range fit within the suggested values.

I'll continue using the MPS2222A's unless I run into any more problems!  
Again, thanks to everyone who helped, both on and off the list.


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com