Geo,
You must have missed the note about C44 on page 22 of the manual - this
capacitor is not used.
As far as your extra capacitor, did you do a full inventory before you
started including checking the number of capacitors of each value
against the parts list? If you did that, you would have known for
certain whether there was an extra (that sometimes happens - rare, but
it happens).
If you did not do a full inventory, I suggest you go to the parts list
and check each location that has a .01 uF capacitor on the board. If
all those locations have a .01 uF capacitor installed, then you can rest
assured that you have an extra one. I know of no easier method.
73,
Don W3FPR
[hidden email] wrote:
> Ref control board caps. I have one cap left over 103. I see on board a
> place marked C44. But instructions say nothing about this part? What's the
> story? Geo/W2BPI
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
