K2 CW R problems

[Gordon LaPoint]

I finished building my K2, finished alignment and all works fine. I
since installed the SSB and AF filter.   Starting the CAL FIL setup I
decided to lower the CW Tone from 750Hz to 650 Hz so I needed to do the
CAL FIL complete including the CW Filters.   I can not get the K2 to go
to CW R mode.  The A/B [REV] button only switches between VFO A and B  
A hold of the button does not activate CW R, What do I have setup wrong?
The modes do step through CW, U and L normally, I do have the OP1 filter
showing up, I have not enabled RTTY mode.

Thanks,
Gordon - N1MGO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Gordon LaPoint]

Never mind, Operator error, I was holding REV   NOT CW REV button.   All
is fine in K2 Land!

Gordon - N1MGO

On 4/1/2018 7:51 AM, Gordon LaPoint wrote:

> I finished building my K2, finished alignment and all works fine. I
> since installed the SSB and AF filter.   Starting the CAL FIL setup I
> decided to lower the CW Tone from 750Hz to 650 Hz so I needed to do
> the CAL FIL complete including the CW Filters.   I can not get the K2
> to go to CW R mode.  The A/B [REV] button only switches between VFO A
> and B   A hold of the button does not activate CW R, What do I have
> setup wrong?
> The modes do step through CW, U and L normally, I do have the OP1
> filter showing up, I have not enabled RTTY mode.
>
> Thanks,
> Gordon - N1MGO

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]