Steve,
You can set the width of the K2 filters to whatever you desire. There
are 4 filter widths for each mode (CW, RTTY, and SSB). The practical
most narrow CW bandwidth is 200 Hz. Usually, at settings more narrow
than that, the signal is attenuated rather than narrowed.
For additional information on setting the K2 filters, take a look at my
webpage www.w3fpr.com Step 3 of the K2 Dial Calibration article.
73,
Don W3FPR
On 12/6/2012 9:12 PM, Stephen Roberts wrote:
> Is it possible to get a narrower filter than 400?
>
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html