K2 DSP Real Time Clock

[Bob DeHaney]

I cannot get the clock to work.  The RTC is "On", new battery, but the clock
display shows the battery as discharged. Otherwise the DSP seems to work
fine.

Vy 73 de Bob DJ0RD/WU5T

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Bob,

The display of "E"s will be shown after the battery has been changed.
Have you tried holding the STORE and RCL buttons together?  If so, what
is displayed after they are released?   See page 33 in the KDSP2 manual.

If you still get all "E"s after holding those buttons, I don't have a
good answer (I have never encountered that).  I would suggest emailing
[hidden email].  Perhaps Gary will have an answer.

73,
Don W3FPR

On 7/17/2018 4:16 PM, Bob DeHaney wrote:
> I cannot get the clock to work.  The RTC is "On", new battery, but the clock
> display shows the battery as discharged. Otherwise the DSP seems to work
> fine.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]