Have you looked at the "The Nifty Mini-Manual"?
It has 3 pages on the DSP settings.
I find it really easy to follow.
The people who sell these are wonderful people.
In the following "Hold" means hold the button(s) for a count of 3
seconds
My most common Non-configuration adjustments during normal rig usage:
- Transitioning through the filters = Hold XFIL
- Turn Noise Reduction ON/OFF = HOLD XFIL + MSG together
Filter and Noise Configuration adjustments:
>From the main frequency readout
- Quick_tap DISPLAY
- Hold BAND+ to cycle through settings
When you are cycling through these settings and you get to the [dSP On]
display
- Quick-tap BAND- will turn DSP OFF
When DSP is OFF it will look like [dSP bYP]
With [dSP bYP] is displayed HOLD BAND+ to turn DSP ON.
NOTE: The display will not change after you release the hold button but
the DSP is back on.
To verify quick-tap BAND+
The filter settings are fairly straight forward.
Its the noise reduction adjustments that one might find the most
confusing.
I use a 750Hz side-tone so my filter settings:
The period after the C indicates D-noiser is ON
C.1 = .75 .80
C.2 = .75 .40
C.3 = .75 .20
C.4 = .75 .05
With the Configuration display as [C1 nr], [C2 nr], [C3 nr] or [C4 nr]
- Quick_tap BAND+ to cycle through Noise Reduction Levels
- Quick_tap BAND- to cycle between "Standard" cw filter and "Soft" cw
filtering
I prefer "Standard" cw filtering instead of the "Soft" cw filtering
I have my Noise Reduction settings at [nr .99 .10]
When your playing with the noise reduction settings you will get your
most pronounced change when transitioning from 99 to 00 on either the
Aggressive value or the Hold-time value.
N1BBR
--
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
