K2 Diffuser placement

[Don Baucom]

I just want to confirm that the A and K on each sides means Anode and Cathode. I am placing the A in the + hole on each side. I want to make sure I dont put it in backwards.

73
Don
K4YND
SN# 7261

[Don Wilhelm-4]

Don,

It is literally impossible to get it backwards - the mechanical position
dictates that it will always be inserted correctly as long as you don't
do anything unexpected such as bending the leads to the opposite side of
the Backlight assembly.

73,
Don W3FPR

On 12/25/2011 7:06 PM, Don Baucom wrote:

> I just want to confirm that the A and K on each sides means Anode and
> Cathode. I am placing the A in the + hole on each side. I want to make sure
> I dont put it in backwards.
>
> 73
> Don
> K4YND
> SN# 7261
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K2-Diffuser-placement-tp7127001p7127001.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html