>John Huffman wrote:
>I'd like to use my K2 with my Ten-Tec Pegasus in a dual receive setup. I
>would listen with either the K2, the Pegasus, or both. I would transmit
>with the Pegasus.
John,
I did precisely what you want to do with the same hardware and software. I
referred to this message,
http://www.ac6rm.net/mailarchive/html/elecraft-list/2005-11/msg00415.htmlfrom Don W3FPR and ran a mute line to an RCA jack mounted in one of the
spare holes on the back of the K2. The Pegasus has a RCA jack on the back
panel connected to an open collector transistor that is used to mute the K2.
It worked very well without any ill effects from RF.
I had a 3 position switch hooked to the headphone outputs of both receivers
so that I could to listen to either receiver or both receivers, one in each
ear piece. Eventually, I came to realize that I could work the same stations
with the K2 without the 100 watts from the Pegasus and ended up selling the
Pegasus.
Tom, AK2B
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.2.3/281 - Release Date: 3/14/2006
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
