Thanks for the several on and off list replies to the dilemma I was seeing.
The problem turned out to be an edge case failure of the USB serial
converter.
It works fine when DE9 pins 2&3 are strapped (hard loopback) but it doesn't
work with the radio.
Changing to a real UART port solved this issue immediately.
NOW ... the original issue can be addressed!
-> The K2 <AI2;> auto-info meta command is *not* sticky.
It does not 'stay' across radio power cycles.
I had hoped this command would be written into the NV memory chip.
Not likely at this stage that Elecraft would issue an updated MCU that did
this.
I guess I could ask! ;-)
Steve KZ1X
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
