[ K2 ] Have You Seen This?

[Gary Hvizdak]

Our new K2 Internal Mic Adaptor (IMA) kit provides flexibility to quickly
reconfigure your K2 for a different mic connector pin-out in the event that
your primary mic is forgotten, damaged, or lost during portable operations.
Or, if you just want to upgrade to a new/better one that's wired
differently.

So far, orders for this new kit are well below expectations.  Unfortunately
without significantly more interest, this very cool new K2 accessory won't
be going to production any time soon, and certainly not at the phenomenally
low price we are attempting to offer it at.

Given how enthusiastic those who have ordered are about it, we are wondering
why there has been so little interest.  Is it that with the dramatic
increase in Reflector traffic since the K3's announcement, that our posts
are getting lost in the crowd?  Is it because readers are too busy with
Field Day preparations to visit our website?

If you are a K2 owner and you've not yet had a look, then we invite you to
take a moment to visit our website at http://www.unpcbs.com to check out
this new accessory.

Gary  KI4GGX
K2 #4067

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Phil-120]

Gary,

I think the reason for the low level of interest in your new Mic Header may
be simple - those of us with SSB adaptors have already chosen our microphone
and set our mic header accordingly. I for one have no intention of swapping
to a different type of mic, so see no need to change the mic header block
again.  Beautiful though your IMA is, I have no need of it.  I imagine most
K2 owners are in the same position as me.

sorry!  Phil G8JQH K2#4019


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Darwin, Keith]

 
Yep, same here.  I'm a CW op but I do have the SSB module and a mic.
I've configured the header for the mic and that's it.  I'm set.  No mic
changes here.  Actually the last time I used the mic it was in a CW QSO
and I used the PTT switch to send code :=)

- Keith N1AS -
- K2 5411.ssb.100 -

-----Original Message-----
I think the reason for the low level of interest in your new Mic Header
may be simple - those of us with SSB adaptors have already chosen our
microphone and set our mic header accordingly. I for one have no
intention of swapping to a different type of mic, so see no need to
change the mic header block again.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com