K2 Help

[Frank Baker-2]

Hello:
I have K2 that has a Transverter board that with the traces messed up on the
RF path where the two RCA connectors connect to. The K2 no longer receives a
signal. Can anyone out there repair this transverter board and K2?
Thanks, Frank


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ian Maude]

Frank Baker wrote:
> Hello:
> I have K2 that has a Transverter board that with the traces messed up
> on the RF path where the two RCA connectors connect to. The K2 no
> longer receives a signal. Can anyone out there repair this transverter
> board and K2?
> Thanks, Frank
It might help if you told us where you were Frank :-)

Ian

--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Frank,

You should be able to repair it yourself.  Use wire to repair the
damaged traces - #30 wire-wrap wire works great for that purpose, but
you can use whatever your have in a small gauge wire - if there is
danger that the wire may contact other parts of the circuits, use
insulated wire.

The schematic is a guide to show you 'which connects to what' - use it.
  As long as everything is properly connected, it should work fine.

73,
Don W3FPR

Frank Baker wrote:

> Hello:
> I have K2 that has a Transverter board that with the traces messed up on
> the RF path where the two RCA connectors connect to. The K2 no longer
> receives a signal. Can anyone out there repair this transverter board
> and K2?
> Thanks, Frank
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com