K2 High Current

[Aaron K5ATG]

I'm running PSK31 on 20 meters with my K2 and FLDigi. At any power level
the display reads HI Cur every time I go to transmit. I'm not sure if I
have something set wrong or what.
Thank you
Aaron K5ATG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Aaron,

HiCur messages are a symptom, but not the "disease".
It can mean that you might have a bad connection in your antenna system
or something similar.
Test into a dummy load to tell if it is a K2 problem or an antenna
problem.  If it works into a dummy load, then the antenna is the problem.

73,
Don W3FPR


On 9/6/2016 7:04 PM, Aaron K5ATG wrote:

> I'm running PSK31 on 20 meters with my K2 and FLDigi. At any power level
> the display reads HI Cur every time I go to transmit. I'm not sure if I
> have something set wrong or what.
> Thank you
> Aaron K5ATG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]