K2 Internal Battery Question

[Tom McCulloch]

I have a K2 with the internal battery option which I trickle charge with
an A&A Engineering smart charger. I've installed the Smart Charger
according the method suggested by Don, W3FPR on his web site.

I've had this arrangement for several years and the battery has charged
faithfully and I have been served well by the charger. However, now I am
noticing that the two lights on the front of the Smart Charger remain
on. all of the time.  the green LED is labeled "Charging" and the red is
"Final Charge" . The K2 meter is showing about 13.4 volts when during
this time.

Am I to assume that the battery itself is faulty and needs to be
replaced (it has been in light service for a good number of years...but
connected to the charger the entire time or is the it possible that
charger has developed a problem?


Any thoughts on this would be very much appreciated.

Thanks

Tom, WB2QDG

K2# 1103

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]