No, but if you change bands on the K2, a quick tap of the "dit" paddle will trigger the frequency counter in the KXPA100, and instantly recall the band pass filter/antenna selection/tuning solution for the new frequency. If you want the greater degree of integration that you mention below, you need to look at the KPA100/KAT100.
That said, it may well be possible for Elecraft to implement the sort of integration you mention between K2 and KXPA100; it would come down to whether they see it as a worthwhile investment of engineering resources.
73, Matt VK2RQ
> On 27 Mar 2015, at 6:45 am, Jessie Oberreuter <
[hidden email]> wrote:
>
>
> Will connecting a K2's serial TxD/RxD lines to the KXPA100 (over the RJ45 jack) allow the KXAT3 to automatically follow band and VFO changes? I presume I would need to set the BPS to 4800 and either poll the K2 or turn AutoInfo on for this to work. The assumption here is that the RJ45 TxD/RxD lines are carrying standard serial data at standard bit rates. If true, I would also expect to be able to talk to the K2 through the KXPA100 just as I would talk to a KX3.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
