Phillip and Don,
Thanks for the quick replies - yes I do have the KAT2 installed. I
originally built the K60XV some months ago and seem to remember
something about changing a resistor in the ATU but I am not sure. I
will look at it in the morning.
Don, this is on the low power and the transverter parameters are
properly set. In fact I have been successfully using it with the 2
meter transverter but I did have to turn the power control back from
the 1mV setting to keep the power level on the transverter at 20W. I
am finishing up a 6 meter transverter and put the K2 back on the
bench to set it up when I rechecked the power adjustment and
discovered why I had to back down on the power control for the 2 meter unit.
Thanks again and I will check on the resistor tomorrow and let you
know what I find out.
Larry Ingram AG4NN
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
