I'd like to add a zero beat indicator to my K2 S/N 4913. But I'm too shaky (and ill equipted) to work with SMDs. Could someone please provide an assembled board at a reasonable cost? Chris WB4WZR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Using the call W6WC, our 12F FD crew will be active for 24 hours from
Centennial Park in Santa Ana, CA. The 'F' designator means the operation is at an EOC. The equipment types are scattered, but at least one K3 will be used - for CW ops. Dave Bates, myself, plus others will attempt continuous operation on all 80-6m bands. I believe there will be at least two K2s and another K3 as well. External bandpass filters will be used extensively, but not on the K3s - not needed! Give us a call if you have time in between working and logging! 73, matt W6NIA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Chris Kimball
I'm interested in this as well.
Wayne Conrad KF7QGA On 06/23/11 07:44, Christopher Kimball wrote: > I'd like to add a zero beat indicator to my K2 S/N 4913. But I'm too > shaky (and ill equipted) to work with SMDs. Could someone please > provide an assembled board at a reasonable cost? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
I'd also pay a premium over the cost of parts for the convenience of
receiving not just the board, but all of the other parts that are needed to install it: LED, wire, spare keycap (perhaps), &c. 73, Wayne Conrad KF7QGA On 06/23/11 09:49, Wayne Conrad wrote: > I'm interested in this as well. > > Wayne Conrad KF7QGA > > On 06/23/11 07:44, Christopher Kimball wrote: >> I'd like to add a zero beat indicator to my K2 S/N 4913. But I'm too >> shaky (and ill equipted) to work with SMDs. Could someone please >> provide an assembled board at a reasonable cost? > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Matt Zilmer
On 6/23/2011 8:08 AM, Matt Zilmer wrote:
> External bandpass filters will be used > extensively, but not on the K3s - not needed! I wouldn't be so sure. It will depend on antenna spacing and antenna directivity. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Chris Kimball
OK, I will make an offer to assemble those kits. $25 each includes
1st class mail shipping to your US address. Here is how it would have to work: 1) You order what you want or need from http://www.wb3aal.com/Pages/K6XX/K6XXCWIndicatorKit.htm 2) Have the kit sent direct to my QRZ.com asddress (hopefully it will name you as the purchaser - ask Ron to make certain of that). 3) Send your check for $25 to my QRZ.com address along with your address and preferred sidetone pitch. 4) When I get the kit, I will assemble it, and if I have your check and sidetone pitch, I will test and align it, and put it in the mail to you. 73, Don W3FPR On 6/23/2011 10:44 AM, Christopher Kimball wrote: > I'd like to add a zero beat indicator to my K2 S/N 4913. But I'm too > shaky (and ill equipted) to work with SMDs. Could someone please > provide an assembled board at a reasonable cost? > > Chris > WB4WZR > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |