John,
Why not fix it correctly and install the entire KAT100UPKT - the T/R
switch was reworked entirely specifically to address that issue.
If you do not have the shield upgrade - with the reduced width notch
above the SO-239 and the solder lugs directly connecting the SO-239 to
the shield, add the shield upgrade as well.
73,
Don W3FPR
John Grimm wrote:
> I recently added a KAT100 to my K2-100 and I'm having problems tuning at high-power only on 40 meters. Symptoms are exactly as described under previous posts on the 40M oscillation issue. My KPA-100 is Appendix G Rev-C prior to the KPA100 upgrade. I have read some previous posts on this subject that simply moving RFC10 may cure the problem, but I'm not clear in which direction to try moving the component? Or should I simply purchase the KPA100 Upgrade kit and make those changes? Thank you for any feedback. John / K0YQ
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html