K2 - KAT2 QRP Tuner in EC2 - Elecraft K2 line ;-)

[oe9fwv]

I would like to add a EC-2 with the KAT2 built in.
My K2 has no room for the KAT2 this is why I need a separate housing. The  
KIO2 is built in.
The KAT2 is powered from the K2 KIO2, right? I'll have to connect the KIO2
and HF to the tuner, that's all?
I'll have to find out the correct pinout for the K2 BUS - hope the numbers
are like on the D-SUB connector.
I plan to connect the K2 RS232 with a D-Sub on the ECS and HF with a BNC
cable through a nice Daiwa SWR meter which fits perfectly into the EC2.

73! de Werner OE9FWV

--
In my electric bill I found this: "We would be de-lighted if you pay
     your bill. However, if you don't, you will be."


Email powered by Pegasus Mail free at <http://www.pmail.com>
Homepage: <http://www.qsl.net/oe9fwv/>
Fone [phone]
Fax [phone]
Mobile [phone]
Fax-Email Gateway [phone]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bob Nielsen-2]

The K2 top cover has enough room for a KAT2, KBT2 and KIO2 all at the same time.  Have you installed something else in that space?

Bob, N7XY

On Nov 8, 2010, at 2:28 PM, Dr. Werner Furlan wrote:

> I would like to add a EC-2 with the KAT2 built in.
> My K2 has no room for the KAT2 this is why I need a separate housing. The  
> KIO2 is built in.
> The KAT2 is powered from the K2 KIO2, right? I'll have to connect the KIO2
> and HF to the tuner, that's all?
> I'll have to find out the correct pinout for the K2 BUS - hope the numbers
> are like on the D-SUB connector.
> I plan to connect the K2 RS232 with a D-Sub on the ECS and HF with a BNC
> cable through a nice Daiwa SWR meter which fits perfectly into the EC2.
>
> 73! de Werner OE9FWV
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[oe9fwv]

hi Bob,

Bob Nielsen schrieb am 8 Nov 2010 um 18:09:

> The K2 top cover has enough room for a KAT2, KBT2 and KIO2 all at the same
> time.  Have you installed something else in that space?

yes - a TRX PTC Pactor controller.
http://oe9fwv.shacknet.nu/oe9fwv/bilder/trxptc_innen_fertig.jpg

73! de Werner OE9FWV

>
> Bob, N7XY
>
> On Nov 8, 2010, at 2:28 PM, Dr. Werner Furlan wrote:
>
> > I would like to add a EC-2 with the KAT2 built in.
> > My K2 has no room for the KAT2 this is why I need a separate housing. The
> >  KIO2 is built in. The KAT2 is powered from the K2 KIO2, right? I'll have
> > to connect the KIO2 and HF to the tuner, that's all? I'll have to find
> > out the correct pinout for the K2 BUS - hope the numbers are like on the
> > D-SUB connector. I plan to connect the K2 RS232 with a D-Sub on the ECS
> > and HF with a BNC cable through a nice Daiwa SWR meter which fits
> > perfectly into the EC2.
> >
> > 73! de Werner OE9FWV
> >
>
>
>

--
I'm desperately trying to figure out why kamikaze pilots wore helmets.


Email powered by Pegasus Mail free at <http://www.pmail.com>
Homepage: <http://www.qsl.net/oe9fwv/>
Fone [phone]
Fax [phone]
Mobile [phone]
Fax-Email Gateway [phone]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html