I just finished my KAT2 for my K2 #6980. According to p. 19 of the
instructions, my KAT2 is supposed to automatically reduce power to 3
watts if my power control is set higher during the autotune, if my
firmware revision is higher than 1.05 on the K2 Main Microcontroller.
My firmware is Revision 2.4.
But it doesn't look like the KAT2 is reducing power during the autotune.
Just wondering if anyone else has experienced a similar situation. No
big deal; I can just do it myself, but thought I'd ask.
Other than the above, the KAT2 seems to be working very, very well
especially since it was able to resolve a 12:1 SWR on a 40 meter dipole
that was resonant on 6.6 mHz. Don't ask...that's another story.
Stan Levandowski WB2LQF
HF QRP CW -- Doing more with less for over 50 years!
QCWA #35038 OOTC #4558 NAQCC #4740 SKCC #6488 FISTS #14992
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
