K2 + KPA100 + KAT100

[Kev Schache]

Hi to all,

My K2 includes the KSB2 SSB, KDSP2, and the K102. The external KAT100-1
ATU has also been completed.
I've just received kits for the KNB2 and the KPA100 and I'm planning to
complete them in that order.

After a lot of research in the archives of this list, I've now belatedly
decided I want to keep the K2 for QRP portable and keep the KAT100 and
the KPA100 separate in an external EC2 enclosure.
I see that I can order the KAT100PNL to convert the KAT100-1 to a
KAT100-2 but I'm uncertain what panels are included in that kit.
This is probably a stupid question but, Is that all that's required to
convert the KAT100-1 enclosure to an EC2 with space for the KPA100 ?
I'm cross with myself for not thinking this out before I placed the last
order.
Is there anything else I will need ?
Or do I have to buy a complete EC2 ?

Thanks and 73's
Kev   VK5KS

K2 #7552
KSB2, KDSP2, K102, KAT100-1 and
KNB2, KPA100 in process

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Kev,

You will need the EC2 as well as the KAT100PNL kits.  The KAT100PNL kit
has only the front and rear panels as well as the headers required for
the KAT100 board.
You may also want the tilt stand if you want to tilt it the same as the K2.

73,
Don W3FPR

On 8/8/2015 2:31 AM, Kevin Schache wrote:

> Hi to all,
>
> My K2 includes the KSB2 SSB, KDSP2, and the K102. The external
> KAT100-1 ATU has also been completed.
> I've just received kits for the KNB2 and the KPA100 and I'm planning
> to complete them in that order.
>
> After a lot of research in the archives of this list, I've now
> belatedly decided I want to keep the K2 for QRP portable and keep the
> KAT100 and the KPA100 separate in an external EC2 enclosure.
> I see that I can order the KAT100PNL to convert the KAT100-1 to a
> KAT100-2 but I'm uncertain what panels are included in that kit.
> This is probably a stupid question but, Is that all that's required to
> convert the KAT100-1 enclosure to an EC2 with space for the KPA100 ?
> I'm cross with myself for not thinking this out before I placed the
> last order.
> Is there anything else I will need ?
> Or do I have to buy a complete EC2 ?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]