[K2} KPA100 Q2

[Frank Hunter-2]

Hi all,
Just carrying out resistance checks on my KPA100 before venturing
further. Q1 base reading is 11.5 ohms, Q2 base reading is 20 ohms which
is higher than should be expected. Problem? If so what should I look for?

73, Frank GI4NKB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Frank,

Sorry for the late reply, but I have been having computer problems.

Check the soldering of R20, and while you are at it, re-flow the
soldering of R35 and the wires to T1.

73,
Don W3FPR

On 12/13/2013 10:25 AM, Frank Hunter wrote:
> Hi all,
> Just carrying out resistance checks on my KPA100 before venturing
> further. Q1 base reading is 11.5 ohms, Q2 base reading is 20 ohms
> which is higher than should be expected. Problem? If so what should I
> look for?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html